Simple Printer Port Interface
Printer Port Circuit to see the inputs logic state and drive a few outputs. The preset control program helps test out the circuit operation. Use safe 5V Levels.
Simple Printer Port Interface
So i made some example circuits and VB programs for students. A demo Milli Volt source, Digital Voltmeter and Logic Analyzer examples for learning, are on these pages. I have tried to derive power from PC itself in this circuit, Care should be taken not to short circuit or apply any voltages above 5V to PC Port Pins.
There are protection in all chips these days, but you may stress the limits, so design and use opto couplers to be on the safer side.
74HCT373 is the only chip used to interface the real world with the PC Parallel port. The Inputs to this chip are protected with Resistors and Zeners. 3 outputs of PC are also monitored using LEDs. This gives you a IO interface for experimenting. Below is a Preset counter simulation that you can use with this circuit for testing. Schmitt Triggers and Signal Conditioning may be required for Noisy and Non-Sandard Inputs.